Raising Chicken Tips: Baby Poultry Brooding Plan for the Floor

A brooding plan for the floor of poultries must be clean and sufficient enough to raise chickens. If not, there would be problems you dare not want to encounter. For planning, preparation is the best way to welcome your backyard mates. First, we plan the necessities, then you worry after everything is intact.

How do you go about planning and building the brooding floor?

Step 1

There are wide selections of products that can be purchased for brooding that will provide a draft free and comfortable environment. For a cardboard ring that is formed around the area suitable for brooding, the popular 13 to 19 inches high ring is commonly used. If you’re planning for a 50-chick capacity, a diameter of 5 ft circle is needed.

Assuming you want to increase the number of chicks, the ring diameter must also be increased that is proportioned with the number of chicks added. This is to reduce the negative outcomes of overcrowding. Aside from the huge cardboard boxes, your child’s plastic pool or an old tank can be an alternative.

Step 2

You have to cover the floor using one to two inches of materials that are absorbent and do not mat that easily. Shavings, ground corncobs, rice hulls, etc. can be your choices. Cedar shavings are not to be used for these are toxic and can lead to chicken poisoning. For the litter, the covering must be of cheesecloth, burlap, towels made of paper, and other materials that are non-slick.

This is appropriate for the first 3 days. With this, there will be easy access for feeding the babies via sprinkles above the material. It will also lessen the possibility for the chicks to have sprattle legs. Lastly, it will prevent litter eating.

Step 3

For a 50-chick capacity, you have to provide adequate heat from lamps. It must be a 250-watt with reflector. Regardless of the baby number, it is required to install at least 2 heat lamps. Picking is the result if the lamp reflects excessive light. That is why red heat lamps are more preferred. Red heat lamps provide sufficient light without going beyond its temperature. Heat lamps are hung at least 18” just above the litter. Inspect the light if they really provide the needed heat.

Step 4

Feeder lids should be made available for feeding. Cut a box down to an inch on its sides. If you are raising game birds and bantams, sides with only three quarters or less is preferred.

Step 5

Wire the brooder system of the floor. A wire floor is required out of materials that are not larger than a half-inch cloth. For raising game birds and bantam, a floor with a size of one-fourth inch is preferred.

Step 6

As specified by the manufacturer, the floor should be of adequate space. This is because the manufacturer recommends the appropriate number of chicks that can be started within the vicinity of the brooder. Check the heat if it is working properly.

Step 7

Provide a 15-watt red night-light. This serves as the brooder’s light during the night for them to see properly.

Step 8

Providing water troughs is wise but can also be a problem for it provides not only sufficient but also excess water access.

After all of these are brought together, make sure that things are working properly and things won’t result to jeopardy. These are just the basics for raising your chickens.

Comments Closed

Comments are closed.

Copyright © Denton County Foreclosures

This site makes use of cookies which may contain tracking information about visitors. By continuing to browse this site you agree to our use of cookies.